2025 FCP_FSM_AN-7.2 exam torrent FCP_FSM_AN-7.2 Study Guide
Easily pass FCP_FSM_AN-7.2 Exam with our Dumps & PDF Test Engine
NEW QUESTION # 16
Which running mode takes the most time to perform machine learning tasks?
- A. Regression
- B. Forecasting
- C. Local
- D. Local auto
Answer: C
Explanation:
In Local mode, FortiSIEM performs machine learning tasks using the full dataset without optimization shortcuts, making it the most time-consuming mode compared to Local Auto, Forecasting, or Regression.
NEW QUESTION # 17
Refer to the exhibit.
A FortiSIEM device is receiving syslog events from a FortiGate firewall. The FortiSIEM analyst is trying to search the raw event logs for the last two hours that contain the keyword "udp". However, they are getting no results from the search, which they know should be available. Based on the filter shown in the exhibit, why are there no search results?
- A. The Time Range value should be set to Real-Time.
- B. The analyst selected = in the Operator column. That is the wrong operator.
- C. The keyword is case sensitive. Instead of typing udp in the Value field, the analyst should type UDP.
- D. The analyst selected AND in the Next column. This is the wrong Boolean operator.
Answer: B
Explanation:
The operator is set to "=", which performs an exact match on the entire raw event log, not a substring search. To find logs that contain the keyword "udp", the analyst should use the CONTAIN operator instead. This will return all logs where "udp" appears anywhere in the raw log message.
NEW QUESTION # 18
Refer to the exhibit.
Which section contains the subpattern configuration that determines how many matching events are needed to trigger the rule?
- A. Filters
- B. Actions
- C. Aggregate
- D. Group By
Answer: C
Explanation:
The Aggregate section contains the condition COUNT(Matched Events) >= 1, which defines how many events must match the filter criteria for the rule to trigger. This is the subpattern configuration that determines the event threshold.
NEW QUESTION # 19
Refer to the exhibit.
An analyst is trying to generate an incident with a title that includes the Source IP, Destination IP, User, and Destination Host Name. They are unable to add a Destination Host Name as an incident attribute.
What must be changed to allow the analyst to select Destination Host Name as an attribute?
- A. The Destination IP Event Attribute must be removed.
- B. The Destination Host Name must be selected as a Triggered Attribute.
- C. The Destination Host Name must be added as an Event type in the FortiSIEM.
- D. The Destination Host Name must be set as an aggregate item in a subpattern.
Answer: B
Explanation:
For an attribute like Destination Host Name to be used in the incident title, it must first be included in the Triggered Attributes list. Only attributes listed there are available for substitution in the title template (e.g., $destIpAddr, $srcIpAddr).
NEW QUESTION # 20
Refer to the exhibit.
An analyst wants the rule shown in the exhibit to trigger when three failed login attempts occur within three minutes.
What should the values be for the condition time window and aggregate count?
- A. Time window 90 seconds, aggregate count 3
- B. Time window 180 seconds, aggregate count 2
- C. Time window 90 seconds, aggregate count 2
- D. Time window 180 seconds, aggregate count 3
Answer: D
Explanation:
To detect three failed login attempts within three minutes, you must set the aggregate count to 3 in the subpattern and the time window to 180 seconds in the rule condition. This ensures the rule triggers only if three or more failed logins occur in that timeframe.
NEW QUESTION # 21
How does FortiSIEM update the incident table if a performance rule triggers repeatedly?
- A. FortiSIEM updates the Incident Count value and Last Seen timestamp.
- B. FortiSIEM generates a new incident each time the rule triggers, and updates the First Seen and Last Seen timestamps.
- C. FortiSIEM changes the incident status to Repeated, and updates the Last Seen timestamp.
- D. FortiSIEM generates a new incident based on the Rule Frequency value, and updates the First Seen and Last Seen timestamps.
Answer: A
Explanation:
When a performance rule triggers repeatedly, FortiSIEM updates the existing incident by incrementing the Incident Count and refreshing the Last Seen timestamp. This avoids flooding the incident table with duplicates while still tracking repeated occurrences.
NEW QUESTION # 22
Refer to the exhibit.
The analyst is troubleshooting the analytics query shown in the exhibit.
Why is this search not producing any results?
- A. The Time Range is set incorrectly.
- B. The Boolean operator is wrong between the attributes.
- C. You cannot reference User and Event Type attributes in the same search.
- D. The inner and outer nested query attribute types do not match.
Answer: D
Explanation:
The issue is that the "User" attribute is incorrectly assigned a Device IP group value, which is a mismatch of attribute types. "User" expects a user name or identity, not a device IP group. This mismatch between the attribute type and the provided value causes the search to return no results.
NEW QUESTION # 23
Refer to the exhibit.
What will happen when a device being analyzed by the machine learning configuration shown in the exhibit has a consistently high memory utilization?
- A. FortiSIEM will update the regression tables for memory utilization, and average sent and received bytes.
- B. FortiSIEM will lower the CPU utilization trigger requirement for CPU utilization.
- C. FortiSIEM will trigger an incident for high memory utilization.
- D. FortiSIEM will update the model with a higher memory utilization average value.
Answer: D
Explanation:
In the configuration shown, FortiSIEM uses Memory Util, Sent Bytes, and Received Bytes as input features to predict CPU Utilization via a regression model. If a device shows consistently high memory utilization, the model will incorporate that into its training data and update itself with a higher average value for memory utilization, influencing future CPU utilization predictions.
NEW QUESTION # 24
Refer to the exhibit.
What happens when an analyst clears an incident generated by a rule containing the automation policy shown in the exhibit?
- A. No notification is sent.
- B. A notification is sent to the SOC manager dashboard.
- C. An email is sent to the SOC manager.
- D. The remediation script is run.
Answer: A
Explanation:
The automation policy has the option "Do not notify when an incident is cleared manually" enabled. Therefore, when an analyst manually clears an incident, no notification or automation action is triggered.
NEW QUESTION # 25
Refer to the exhibit.
According to the automation policy configuration shown in the exhibit, what happens if an associated rule triggers?
- A. FortiSIEM sends an email, because that is first on the list.
- B. FortiSIEM performs all selected actions.
- C. FortiSIEM runs the remediation script, because that takes precedence over all other options.
- D. FortiSIEM fails to the integration policy, because no policy is defined.
Answer: B
Explanation:
When an associated rule triggers, FortiSIEM performs all selected actions in the automation policy. In this case, it will send an email/SMS/webhook, run the remediation script, invoke the integration policy (even if none is currently defined), and create a case. All checked actions are executed.
NEW QUESTION # 26
Refer to the exhibit.
An analyst is troubleshooting the rule shown in the exhibit. It is not generating any incidents, but the filter parameters are generating events on the Analytics tab.
What is wrong with the rule conditions?
- A. The Aggregate attribute is too restrictive.
- B. The Event Type refers to a CMDB lookup and should be an Event lookup.
- C. The Destination Host Name value is not fully qualified.
- D. The Group By attributes restricts which events are counted.
Answer: D
Explanation:
The Group By attributes - Destination IP and User - cause the aggregation (COUNT(Source IP) >= 2) to apply within each unique combination of those groupings. This restricts the count calculation and can prevent the rule from triggering incidents, even if matching events exist in the Analytics tab.
NEW QUESTION # 27
Refer to the exhibit.
As shown in the exhibit, why are some of the fields highlighted in red?
- A. The Event Receive Time attribute is not available for logs.
- B. No RAW Event Log attribute information is available.
- C. The attribute COUNT(Matched Events) is an invalid expression.
- D. Unique values cannot be grouped B.
Answer: D
Explanation:
The fields are highlighted in red because unique values such as Event Receive Time and Raw Event Log cannot be used in group-by operations. Grouping requires aggregatable or consistent values across events, while these fields are unique to each event, making them incompatible for grouping.
NEW QUESTION # 28
Refer to the exhibit.
An analyst is trying to identify an issue using an expression based on the Expression Builder settings shown in the exhibit; however, the error message shown in the exhibit indicates that the expression is invalid.
What is the correct syntax to create an expression that generates a total count of matched events?
- A. (COUNT) Matched Events
- B. Matched Events (COUNT)
- C. COUNT(Matched Events)
- D. Matched Events COUNT()
Answer: C
Explanation:
The correct syntax is COUNT(Matched Events) - with proper capitalization and spacing - to generate a total count of matched events. The error in the exhibit likely stems from a formatting issue (e.g., lowercase count() or incorrect spacing), not the logical structure of the expression.
NEW QUESTION # 29
What can you use to send data to FortiSIEM for user and entity behavior analytics (UEBA)?
- A. FortiSIEM worker
- B. SSH
- C. FortiSIEM agent
- D. SNMP
Answer: C
Explanation:
The FortiSIEM agent can be used to send detailed endpoint data such as user activity and process behavior to FortiSIEM, which is essential for performing User and Entity Behavior Analytics (UEBA).
NEW QUESTION # 30
......
FCP_FSM_AN-7.2 PDF Pass Leader, FCP_FSM_AN-7.2 Latest Real Test: https://examsforall.actual4dump.com/Fortinet/FCP_FSM_AN-7.2-actualtests-dumps.html